BD-10(I)

Polymer Elastic Waterproof Mortar (Type I)

Product Description

    BD-10(I)Pre-packaged two-component cement-based modified waterproof coating. When brushed paint is produced when mixed, it can be achieved with a hard brush, roller, or trowel to achieve the desired thickness. After the material is applied, it can infiltrate into the base surface and form a layer of dense crystals to achieve effective waterproofing.

BD-10 is composed of selected cement, graded aggregate and powder additives, and liquid polymer, providing excellent adhesion, elasticity, toughness and durability.

Executive standard

This product complies with "GB/T 23445-2009 Type I" standard

Product Usage

BD-10(I)Completely cured to form a seamless elastic waterproof layer that can be applied in the following areas:

1, can be applied to wet areas such as the kitchen, bathroom, balcony.

2. This product is also applicable to the waterproof project of positive water surface or negative water surface.

3. Waterproofing of buildings with slight vibration, movement, and cracks, waterproof of various pipes, waterproofing of expansion joints and post-casting belts.

4, underground parking, deep basement, underground tunnels, drains, floor wall floor, swimming pool.

5. Indoor and outdoor cement concrete structures, precast concrete structures, cement and floor tiles, and brick walls.

Product Benefits

口 It is used for wet base surface                          口 No need to base oil, short setting time

口 Stable and not swell                                          口 Flexible, breathable, tasteless, non-toxic

口 Cured to withstand pedestrian traffic             口 Pre-packaged two-component material, convenient site construction

Technical data

Consumption

A thickness of about 1.2-1.5mm 25-30m2 / units

Packing

Net weight 42 Kg (liquid 17 kg/barrel + powder 25 kg/bag)

Storage

Unopened packaging can be stored for 6 months, storage environment must be dry